Miss a day, miss a lot. Subscribe to The Defender's Top News of the Day. It's free.

Read Part 1 here.

You’ve heard the news of a revolutionary frequency-based device that has a list of diseases it can supposedly remedy that would make Pfizer’s R&D team leader quiver.

You’ve read dozens of testimonials and your head’s still spinning. Some were from cancer patients who were classified as terminally ill and had gone into “spontaneous remission.”

Others came from people so ill they were permanently bedbound — until their frequency treatment got them walking again. Let’s also not forget the athletes who used it and developed superhuman powers.

Your critical mind tells you this could mean only one of two things. The testimonials are from intensely satisfied people who’d experienced what many might typically classify as a miracle. Or they’ve been fabricated by over-zealous marketeers keen to make a buck.

Any of this sound familiar?

This article is about helping you to make sense of this rapidly expanding sector of primarily electrically-powered frequency medicine devices.

We won’t be dealing here with some of the non-technologically dependent modalities of frequency medicine, other than in passing. That includes everything from acupuncture, qigong, reiki and homeopathy, to hands-on healing, crystal therapy and distance healing. This area of subtle energy medicine — as relevant as it is for many — we’ll leave for another article.

Diversity rules

This is one area where the phrase, “not all [in this case devices] are created equally,” is especially pertinent. It’s also an area where, in the case of some devices, it’s not possible to appraise either safety or benefits because there just aren’t enough technical data available to know what the devices are actually doing as they interact with the human body.

More than this, some devices falling under the amorphous banner of “frequency medicine devices” have actually been found to cause harm. This has been most evident with electromagnetic field-based devices used occupationally by physiotherapy operators on a daily basis and for extended periods of time.

Perhaps we shouldn’t be surprised about the potential for harm, given we now know categorically that some low-intensity electromagnetic fields that deliver low to mid-range frequencies, such as those used in powerlines, wifi routers and mobile phones, can also do harm, especially to those who are electrohypersensitive.

This article, which follows Part 1, which aimed to show why electromagnetism and resultant frequencies are inexorably linked to life and health, has been written to help demystify the rapidly emerging field of frequency-based devices, as used for assessing aspects of health, or for treating the body, either in healthy people or those with a specific condition.

We also aim to give you the categories of information that we think should be available to anyone who consents to use such a device of this type, in accordance with one of the most important and fundamental principles of medical ethics, namely informed consent.

This requires that users of devices are provided with information on the potential risks and benefits of the intervention before they use it. If a practitioner is involved, properly informed consent also requires that the user is informed of possible alternative interventions so he or she can exercise the freedom to choose.

What we’re not talking much about

There is an incredibly diverse range of commercial devices being used in the health space that relies on frequencies. We won’t be talking, except in passing, about the multitude of electrotherapeutic devices that have been widely used in conventional medicine, especially in physiotherapy, some for more than 70 years.

These include a range of technologies that use electrical currents (microcurrents) to trigger nerves and muscles, that induce a thermal (heating) effect often among other effects, such as Transcutaneous Electrical Nerve Stimulation or TENS, Neuromuscular Electrical Stimulation or NMES, Functional Electrical Stimulation or FES, Iontophoresis (which we mentioned in relation to Robert Becker’s work with silver ions and joint healing in Part 1), High Voltage Pulsed Galvanic Stimulation or HVPGS and the like.

Technologies also used by physiotherapists, which we won’t include here, are thermal methods such as therapeutic ultrasound that deals with sound waves, which generate acoustic and vibratory frequencies but not electrical, magnetic or electromagnetic fields, as we also discussed in Part 1.

Off our list of talking points will also be the use of intense light from lasers, such as Low Level Laser Therapy or LLLT and High Intensity Laser Therapy or HILT.

So what does that leave us with?

What we’ll be focusing on in the main is the gamut of devices that emit electromagnetic energy that is often also able to measure the body’s own weak electromagnetic fields.

These are the kinds of devices that are gaining more and more use in the sphere of integrative or “alternative” medicine and so are the ones most likely to be encountered by proponents of natural health and wellness.

As you may recall from Part 1, any electromagnetic field involves an interaction between both electrical and magnetic fields — and these fields allow the transfer of energy through electromagnetic waves, and that energy can have profound effects on different processes and structures in the human body from our skin all the way to our DNA.

A question of quality and quantity

If a device professes to be able to read the body’s magnetic field, it needs to be incredibly sensitive given the electromagnetic energy output of the body is extremely weak (which doesn’t make it unimportant) and mediates its effects well below the thermal (heating) threshold.

Thermal (energy) is of course a different matter. We each, as adults, issue around 100 watts of energy, 24/7. This thermal energy, that’s responsible for maintaining our body temperature despite the continuous loss to the environment around us, is generated primarily by all the biochemical reactions associated with our metabolism that in turn release energy in the form of heat.

But it isn’t this thermal energy that ultimately controls the interactions of individual molecules, atoms and sub-atomic particles in the extraordinarily sophisticated way that we know as “life.”

That’s down to the much weaker and more coherent electromagnetic energy that we considered in Part 1, energy that helps create the crystalline energy of our biofield that in turn provides the matrix for the body-mind being that we think of as the human species.

This electromagnetic energy is always issued in a wave form and doesn’t need a medium (like air or water) to propagate, which is why electromagnetic waves can travel through space. This enables us to see stars with the naked eye, including stars in the Andromeda galaxy that are estimated to be some 2.5 million light years away.

Remind yourself that when you look at those stars, the light and image you’re looking at represented events that took place 2.5 million years ago before the first members of our genus Homo appeared on Earth!

These waves, which are the product of combined electrical and magnetic fields, have five key, interrelated properties:

  1. Frequency – the number of wave crests passing a given point per second, with 1 Hz being equal to one wave cycle per second.
  2. Wavelength – the distance between each wave crest (figure 1), measured typically in meters, millimeters or nanometers.
  3. Amplitude (height) of the wave (figure 1), which is a determinant of its power or intensity, is often measured in milliGauss (mG) or Tesla units.
  4. Waveform the shape of the wave, including whether it’s a smooth sine wave with rounded crests and troughs, or a stepped digital wave, as well as whether the form is continuous or pulsed, or changes in form over time.
  5. Energy the amount of energy carried by the wave that is dependent on its frequency and in particular its amplitude (wave height; figure 1).

As Einstein’s general theory of relativity formula E = mc² reminds us, it is the energy carried through electromagnetic waves that can be converted to matter, and, equally, matter can be interconverted back to energy.

Units of measurement of energy vary depending on the type of field being measured. They include milliGauss (mG), nanoTesla (nT), Ampere per meter (A/m), microWatts per square meter (µW/m²), Volts per meter (V/m), or as the specific absorption rate (SAR), namely the power absorbed per mass of human tissue, expressed as watts per kilogram (W/kg).

Figure 1. The wavelength and amplitude of an electromagnetic wave (sine wave form). Source: European Commission.

Electromagnetic waves — in a vacuum — always move at the speed of light (just under 300 million meters per second).

Why?

In simple terms, because that’s the speed of light and light is a form of electromagnetic energy as you’ll see from any diagram of the electromagnetic spectrum (see “visible spectrum,” figure 2).

Figure 2. The electromagnetic spectrum shows wavelengths (in meters, including the size of objects that approximate them) and frequencies (in Hz).

Three key parameters of an electromagnetic wave, namely the frequency (figures 2 and 3), wavelength (figure 1) and energy, are interrelated mathematically — as the great Scottish scientist James Clerk Maxwell proposed in the 1860s and 1870s.

So if you know one of the parameters you can calculate the other two, using what are referred to as Maxwell’s or the Maxwell-Heaviside equations.

While you could describe all electromagnetic energy or waves using all three of these parameters, a convention has evolved in physics that means radio and microwaves are commonly described in terms of their frequency (Hz), infrared and visible light in terms of their wavelength (meters [m] or nanometers [nm]) and x-rays and gamma rays in terms of their energy (electron volts, eV).

Both x-rays and gamma rays are forms of ionizing radiation, meaning they carry so much energy, they can remove electrons from atoms thereby ionizing them. An electron volt is the amount of kinetic energy that’s needed to move one electron through one volt potential.

The interrelationship between these three parameters always means that the shorter the wavelength, the greater the frequency, and the greater the energy. That’s why radio waves are widely considered safe, and x-rays and, to an even greater degree, radioactive gamma rays, are so dangerous.

Oh, if only that was all we needed to know about physics to understand frequency-based devices! There is actually a multitude of other parameters that change the biological effects of electromagnetic radiation, these being specific not only to the radiation source but also to the condition and state of the receiving cells, tissues, organs and organisms.

There is still a huge amount that remains to be explained. But what we do know is that another key parameter is the waveform, which takes into account its pattern, whether it’s continuous or pulsed and even whether it’s analog or digital, the former typically being smooth and sine wave like, the latter typically stepped and jagged (unless converted to an analog signal through a specific piece of technology called a digital to analog converter or DAC).

Electromagnetic waves can also be refracted (bent) in specific directions when they enter particular media — and the amount and direction of refraction are dependent on both the wave type and the medium exposed.

Electromagnetic fields (EMFs) are produced by all forms of electrical or electronic equipment, whether it’s a radio, TV, computer, cellphone, dimmer switch — or an electrically-powered frequency medicine device.

Figure 3. NASA’s classification of the electromagnetic spectrum by frequency, showing both the radio and optical spectrum. Source: NASA

Units for measuring EMF radiation

Despite all these (and other) different characteristics of electromagnetic waves, there are a number of measurements of EMF that can be readily measured at low cost that gives us key information about their potential for biological effects, especially, from what we currently know, their potential to cause harm. These are:

  • For the magnetic component of the field, the amount of energy measured in milliGauss (mG) or nanoTesla (nT) (1 mG = 100 nT).
  • For the electrical component of the field, the amount of energy measured in Volts per meter (V/m).
  • For the radiofrequency component, the amount of energy measured in microWatts per square meter (µW/m²) that will include high-frequency EMF (100 kHz to 300 GHz) as used in wireless transmission (e.g. cellphones, computers, screens, TVs, cell towers, wifi routers, Bluetooth devices, etc.).

While there are a host of different standards for EMF exposure limits set by different organizations in different countries, these are generally based on thermal effects and accordingly the limits tend to be extremely high and not consistent with what is known about the harmful effects of radiofrequency radiation.

Examples include the limits set by the International Commission on Non-Ionizing Radiation Protection (ICNIRP) and those by the Institute of Electrical and Electronics Engineers (IEEE) through its International Committee on Electromagnetic Safety (updated in 2019).

ICNIRP has developed Exposure Limit Values (ELVs) and Action Levels (Als) for static magnetic and electrical fields and time-variable electromagnetic fields that have in many countries been transposed into law, especially to protect workplace environments — such as in the European Union (EU) and through the Control of Electromagnetic Fields at Work Regulations 2016 in the U.K. These are limits for the amount of energy emitted by the EMF source and the resultant power absorbed per unit mass of body tissue.

Anyone concerned about electrosmog, has to disregard these levels because they are based only on thermal effects, despite intense lobbying by scientists and campaign organizations to include non-thermal effects.

Not only that, humans and all forms of life are, each year, being exposed to an ever greater number of devices emitting human-created EMFs, including digital signals that are new-to-nature, that have been demonstrated to interfere with biological systems (see Henry Lai’s 2022 research summaries).

All electrical and electronic devices sold in the European (European Economic Area, EEA) market require a CE mark.

This mark affirms that the manufacturer has conformed to relevant European health, safety and environmental protection standards. That typically means conformity to EU standards for electromagnetic compatibility (i.e. it meets the standards set in the EU’s EMC Directive (2014/30/EU), which applies across the EEA).

As a point of interest (and amusement?), given that so many electronic goods come in from China, some unscrupulous Chinese operators apparently have been known to illegally print the CE mark on their goods without ensuring conformity to relevant standards.

These can often be identified by their use of the wrong fonts or character spacing and we were informed that among such disreputable companies, there is the mistaken belief that “CE” is an abbreviation of “Chinese Export”!

While you will find a CE mark on all but the most “wacky” (read: potentially ineffective or dangerous) devices sold on the European market, the problem is that it is the manufacturer’s responsibility to conform to the relevant standards, and there is some debate as to which ones are relevant.

Not only that, there are no specific standards for frequency-based devices directly relevant to their health application, causing some companies to make do by meeting the lowest standards, those required for general household electric and electronic goods.

The point is, it’s not easy doing due diligence when the framework for ensuring devices don’t cause harm is half-baked or rickety.

Some companies comply with many more standards than others, many don’t specify exactly which ones they comply with, and some argue (incorrectly) that CE mark conformity means their device has been proven to be safe for its intended use. This isn’t the case necessarily, as, while EMC conformity might mean the device doesn’t emit levels of radiofrequency radiation that exceed the ICNIRP standards that the directive is based on, it doesn’t mean the device is safe in its intended use as a frequency-based device.

This is the same problem we face with cellphones. The manufacturers tell us they’re safe because they conform to ICNIRP (that they’ve helped develop), but we also know (as discussed above) why these standards are grossly insufficient, hence the widespread and increasing problem of electrohypersensitivity.

To understand safety, a much more extensive evaluation is necessary, with due account being taken of dosimetry, itself a hugely challenging area.

So who’s your best friend?

For many, it may indeed be a dog. But it’s okay to also have a technology partner — and let’s hope that’s not your cellphone! It’s a device many of us can use in order to better understand our exposure to the invisible and potentially harmful EMF smog we can all be surrounded by (especially from cellphones!) — often unknowingly.

Yes, of course, I’m talking about an EMF meter.

There are many different makes and models available commercially, but I personally have found the highly portable, U.S.-made Trifield TF2 to be particularly useful with a broad frequency range and good sensitivity.

It measures magnetic (e.g. for powerlines, appliances, motors, wiring in walls, etc.) and electrical fields (e.g. for fluorescent lights, power outlets, switches, dimmers) in both standard and weighted modes (the latter means the readings become more sensitive in the mid-band), as well as the radiofrequency (RF) range (e.g. for cellphones, computers, wifi routers, microwaves, radio/TV transmissions).

A Trifield device, or similar, can be fantastically helpful to better understand EMFs in your home and workplace.

If you get high readings when measuring RF, magnetic or electrical fields in particular locations in which you spend a lot of time, there are often changes that you can make by moving equipment around or turning some of them off when they’re not in use. See Graham Arthur’s tips for reducing EMF exposure, mentioned above, for further information.

Trifield suggests the following levels might be reasonable thresholds for ‘EMF safe’ environments for the following three fields. Unlike the non-sensical ICNIRP limits, the company suggests these levels make sense because there is no evidence for the induction of health problems (even non-thermally induced ones) when levels are below them:

  • Magnetic field: 3 mG standard, 5 mG weighted
  • Electrical field: 50 V/m standard or weighted
  • RF: 0.200 mW/m2 (field measurement), 1.000 mW/m2 (peak measurement)

Demystifying frequency devices 

With our dining table set, having covered off some of the basics (let’s call the bit above our starter), let’s now dig into some of the technologies that are out there (prepare now for the main course).

The first step in my journey to help demystify the area got me building a “taxonomy” of devices that covers some of the most common or popular types of devices that are available commercially. This journey took me through a significant amount of the published literature, but I found one journal article and one website to be particularly helpful in identifying frequency technologies that had been widely studied, some of them for more than 70 years.

The journal article to which I was referring (and I’ve had the great pleasure of meeting one of its authors, Tiffany Barsotti) is as follows, along with the website:

The taxonomy (inevitably incomplete as with most taxonomies of complex systems) is shown below in figure 4.

Figure 4. Non-exhaustive classification of frequency-based modalities and therapies (with therapy type/category given in brackets).

On building this classification, we were surprised at the number of frequency-based technologies that had already been adopted by the medical mainstream (not necessarily exclusively), especially in the fields of physiotherapy, neurology and dermatology (20 out of 31 = ~65%). Note that for each device type, there are often numerous different manufacturers.

This information gives you the capacity to immediately disregard anyone’s attempt to cast aspersions on frequency medicine if they try to claim it’s nothing more than fringe pseudoscience!

The classification screams this is just not the case! And while we’re on this delicate point, let’s not be fooled into thinking pseudoscience has only ever been associated with alternative medicine. There are bucketloads of it in mainstream medicine (more on that another day!).

But for us “believers” in the power of frequency, here’s the horse pill we really need to swallow: frequency medicine has become increasingly accepted as the basis of diagnostic technologies, but it has made little impression in any of the areas where it might be used as a treatment for disease if it means it would then compete head-to-head with Big Pharma’s cash cows; think heart disease, cancer, infectious diseases, depression, arthritis and diabetes.

You’re unlikely to need me to explain why.

Entering the lion’s den

To unpack this next part of our journey, we need to enter the complex world of a partially regulated market that spans the continuum between the medical mainstream and the well-being sector, interfacing with the periphery of the most “out-there” realms of alternative medicine (see figure 5 below to view a selection of devices that were subject to our analysis).

We need to take on board the fact that the sector operates within a rapidly emerging scientific discipline in which there is still little general consensus, and, within it, are actors often keen to protect their intellectual property.

On some occasions, you even get to encounter shameless and fanciful marketing of devices that are either known by their makers to not be what they claim or, just as bad, the marketeers barely know anything about the technical specifications of what they are selling.

Figure 5. A selection of frequency-based devices used in conventional medicine and in the wellness space.

Key: A = BICOM Resonance Device (Pulsed Electromagnetic Field or PEMF device). B = Shortwave Diathermy (Shortwave Diathermy, Continuous Emission). C = Homeopathy (Other). D = Magnetic therapy (Biomagnetic Therapy). E = Vitatec Vitalfield Devices (Global Diagnostics, Mito, DigiconPro) (PEMF devices). F = Phototherapy (Phototherapy). G = Rayonex Rayocomp PS 1000 polar 4.0 (Bioresonance Therapy). H = Resonant Light PERL (Plasma-based Rife Machines). I = Shockwave therapy (Vibration/Sound). J = TENS Machine (Microcurrent). K = Tensor Field Generator  (Other). L = Low Intensity Pulsed Ultrasound (LIPUS) (Ultrasound).

Credits: A: BICOM Resonance Device; B: Shortwave Diathermy; D: Biomagnetic therapy; E: Vitatec Vitalfield; G: Rayonex Rayocomp PS 1000 Polar 4.0; H: Resonant Light PERL; K: Tensor Field Generator; L: Low Intensity Pulsed Ultrasound (LIPUS).

During our research for this article, we requested data on some specific technical criteria identified by a leading researcher in the field, Bulgarian scientist, professor Marko Markov, Ph.D. Markov is the author of more than 14 books, 192 scientific articles and 282 papers and short communications given at various international meetings on the subject.

Among his works, he is the editor and co-author of the highly informative book, “Electromagnetic Fields in Biology and Medicine.”

In his 2015 paper, “XXIst century magnetotherapy,” Markov stated:

“The manufacturers and distributors of magnetotherapeutic devices, as a rule, do not provide sufficient information about the device characteristics. In most cases, it is not done on purpose, but because of lack of knowledge as to what information is necessary for clinicians to make proper selection of the device and protocol for treatment.”

In the same paper, Markov goes on to list the parameters he argues are necessary “for characterization of device and study/clinical trial” — and accordingly, we have sought to solicit data on these parameters from selected manufacturers:

  • Type of the field
  • Frequency
  • Pulse shape
  • Intensity or induction
  • Gradient (dB/dt)
  • Vector (dB/dx)
  • Component (electric or magnetic)
  • Depth of penetration
  • Localization
  • Time of exposure (duration of session)

The replies we received from some companies from whom we requested information suggested there is a lack of knowledge or an insufficient desire for transparency:

  • One representative indicated gratitude that we were writing an article, but added, “we don’t know how to provide the data you need.”
  • Another said, “It’s all proprietary information and I signed a non disclosure agreement so I can’t provide you with technical specifications.”
  • One couldn’t, or wouldn’t, provide any technical data, in the hope the following would be sufficient; “[our device] emits its own resonating frequencies which create a field.”
  • Yet another said it would like to provide answers about its company’s device “but those answers don’t really fall into the categories you’re asking about.”

The consequences of poor industry self-regulation aren’t good for natural health

There are five basic properties of any frequency medicine device that you should be able to readily know about from the outset, prior to using it.

  1. Firstly, is the device able to measure all, or part, of the body’s biofield (energy body, see Part 1), and if so, what measurements is it taking from which parts of the body?
  2. Secondly, does it emit or deliver frequencies to the body? If so, what are some of the important parameters of these signals?
  3. Thirdly, does it contain any algorithms that change the frequencies that it delivers according to what it has measured? In other words, does it use some kind of a biofeedback system, and if so, are some details of it available?
  4. Fourthly, what are the specifications that provide information on the quality of the device components that receive and emit electrical, electromagnetic or acoustic signals, and, if relevant, through what components are these signals transmitted (e.g. cables) or converted (e.g. digital to analog converter)?
  5. Fifthly and finally, can the company provide instructions on recommended use (including duration of exposure), as well as evidence that the device is safe and that people have benefited from its use? If so, are these data plausible and are they of adequate quality?

As frequency-based devices represent an emerging industry sector, technological specifications are varied in both type and measuring unit.

If the device is emitting electromagnetic radiation with the expectation that it will modulate cell or tissue function, it is important that a user or practitioner is able to readily access information on frequency ranges, magnetic flux densities and dosimetry (how much of what type of radiation is delivered to the body).

Given the complexity of some of the devices, these data will often need to be given in ranges, rather than as discrete figures.

For many companies this might seem a lot to ask, but would you buy processed food at your local supermarket that chose not to specify the ingredients they’d used to make it?

Would you buy a medicine that didn’t have a label?

Would you buy a motor car that didn’t specify its performance or efficiency data?

Our sense is that if frequency device manufacturers as a whole don’t raise their game and put more information into the public domain as part of their responsibilities as a self-regulated industry, they will be forced, through the political process that is generally ambivalent about non-pharmaceutical approaches, into becoming regulated over time.

As we’ve seen from past history in the field of dietary supplements and other natural modalities, this is rarely a good thing either for natural health or for the well-being of people.

Common outcomes of government regulation are: the knee-capping of choice, the elimination of the most innovative, smaller players and preferential treatment of those with the deepest pockets who toe the mainstream line.

A particularly vulnerable area is the many PEMF devices (figure 4) in the well-being space which don’t currently have any medical device registration from a regulatory authority such as the U.S. Food and Drug Administration (FDA), the U.K.’s MHRA, or their equivalents.

How do frequency-based devices work?

Let’s talk about measurements first. You can measure the human biofield in many dimensions, scales and resolutions, not unlike the way you measure or evaluate any other complex system, be it, for example, our planet, a lake or an apple orchard.

Sometimes you want a generalized view, sometimes you want to get in close or dive especially deep.

Sometimes you’ve got systems that give you a very high resolution, other times, the resolution you’ve got to play with is more generalized, or even fuzzy.

Sometimes, even, the signal’s so weak and fuzzy you’re not sure if you can distinguish what you’re looking at from the background frequencies of natural and technological origin.

You may be dealing with equipment or components that have extraordinary levels of resolution, akin to when you use a macro lens on a camera that allows you to magnify the eye of spider such that it fills your computer screen.

But use a telescope from a satellite to view the field you photographed the spider in, and things look very different. These kinds of differing perspectives and resolution capacities are part and parcel of different systems that attempt to measure the biofield.

But just like when you buy your camera, a potential buyer of a frequency-based device should have ready access to detail about the technology’s specifications and capacities. Currently, this is not always the case in this sector.

It’s also worth remembering, even if you’re dealing with a highly sensitive, high-resolution system that’s able to measure specific areas of the body, the measurements don’t necessarily translate directly to the physiology or pathology we’re used to dealing with when we look at the physical body and the underlying physiological and biochemical processes that function within it.

While the precise mechanisms have yet to be elucidated or agreed upon through consensus, this is likely because the non-biochemical, energetic system of the body — the biofield — actually controls the other processes and operates in the realms of quantum biology, not Newtonian biology.

Looking at it another way, the biofield is likely the master controller of the biological system; the invisible information matrix that is superimposed, both through and over, all living beings.

Some devices are restricted to low frequencies (say below 100 Hz), some manufacturers claiming that is because these are the ones the body operates with and they don’t interfere with the radio frequencies used in communication systems that are known to be harmful.

As the science progresses, it seems such views are increasingly invalid, as different parts of our bodies emanate an incredibly broad range of frequencies, from very low frequencies in the sub-100 Hz range, through the kilohertz (KHz), gigahertz (GHz), terahertz (THz) and even into the picohertz (PHz) range, and probably beyond. This is well illustrated in figure 6 below, from Kučera & Havelka.

Figure 6. Spontaneous mechanical oscillations (passive and active) in different parts of the human body within the frequency spectrum. Source: Kučera & Havelka.

Even the ultra-weak biophoton emissions from DNA as explored by Fritz-Albert Popp and co-workers (Part 1) are in the ultraviolet to visible light range (wavelength 200-800 nm).

The bottom line is whether or not the typically ultra-weak signals can or can’t be detected across the range is down to the sensitivity and specificity of the antennae being used.

This is in effect a performance characteristic and an area that we believe should ideally be specified on consumer-facing specifications. Currently, such declarations are uncommon on many machines in the wellness space.

When it comes to frequency emissions, we open a can of worms. Much of the specification data appears to be guarded closely in order to protect intellectual property. My sense is, nonetheless, that a lot more could be disclosed without risking intellectual property.

For example, disclosing certain characteristics of the emitted frequencies such as the frequency range, wavelength range and energy output range would still mean, for example, that details of the waveform, the pattern of any pulses and the algorithms that control any biofeedback systems, would remain confidential.

We were actually surprised, for the 23 devices we evaluated based largely on publicly accessible information, together with a prompt for any additional information by email, how few data fitting Markov’s checklist of parameters were available.

However, there were clear exceptions. The data we managed to tabulate are shown below.

Summary of publicly accessible information from a selected range of frequency medicine devices used in the health and well-being sector 

ARC Microtech/ARC4Health

  • Device type: Transcutaneous Electrical Nerve Stimulation (TENS)
  • Registered medical device (Y/N), class if relevant: Yes, IIa
  • Energy system measurement (diagnostic) (M) and/or treatment (T): T
  • Frequency receiver (Y/N: if yes, range):
  • Electrically-powered frequency emission (Y/N, if yes, type e.g. PEMF): Y, microcurrent
  • Markov parameters* (for emission devices only): Output current – 0-400 uA.
  • Evidence of effectiveness
  • Website

BICOM Optima

  • Device type: Pulsed Electromagnetic Field (PEMF) Devices/Bioresonance Therapy
  • Registered medical device (Y/N), class if relevant: Yes, IIa
  • Energy system measurement (diagnostic) (M) and/or treatment (T): M
  • Frequency receiver (Y/N: if yes, range):
  • Electrically-powered frequency emission (Y/N, if yes, type e.g. PEMF): Y, PEMF
  • Markov parameters* (for emission devices only): 1 Hz to 250 kHz.
  • Evidence of effectiveness
  • Website

BioEnergetiX WellNES System

  • Device type: Pulsed Electromagnetic Field (PEMF) Devices (Scenar)
  • Registered medical device (Y/N), class if relevant: N
  • Energy system measurement (diagnostic) (M) and/or treatment (T): M + T
  • Frequency receiver (Y/N: if yes, range): Y, 15 – 480 Hz
  • Electrically-powered frequency emission (Y/N, if yes, type e.g. PEMF): Y, PEMF
  • Markov parameters* (for emission devices only): None found/offered.
  • Evidence of effectiveness (science papers)
  • Website

Biophilia Tracker

  • Device type: Pulsed Electromagnetic Field (PEMF) Device
  • Registered medical device (Y/N), class if relevant: N
  • Energy system measurement (diagnostic) (M) and/or treatment (T): M + T
  • Frequency receiver (Y/N: if yes, range):
  • Electrically-powered frequency emission (Y/N, if yes, type e.g. PEMF): Y
  • Markov parameters* (for emission devices only): None found/offered.
  • Evidence of effectiveness:
  • Website

Bio-Well Gas Discharge Visualisation [GDV] camera

  • Device type: Gas Discharge Visualisation (GDV)
  • Registered medical device (Y/N), class if relevant: N
  • Energy system measurement (diagnostic) (M) and/or treatment (T): M
  • Frequency receiver (Y/N: if yes, range): Y
  • Electrically-powered frequency emission (Y/N, if yes, type e.g. PEMF): N
  • Markov parameters* (for emission devices only): Not relevant (as non-emitting)
  • Evidence of effectiveness:
  • Website

Bio-Well Bio-Cor EHF

  • Device type: Vibroacoustic and Electromagnetic/Milliwave Therapy
  • Registered medical device (Y/N), class if relevant: N
  • Energy system measurement (diagnostic) (M) and/or treatment (T): T
  • Frequency receiver (Y/N: if yes, range): Y, GDV camera
  • Electrically-powered frequency emission (Y/N, if yes, type e.g. PEMF): Y, Milliwave
  • Markov parameters* (for emission devices only): Extremely High Frequency (EHF) in the millimeter gigahertz range with very low intensity; wavelengths specified in two regimes: 1.8+4.0+7.7+8.2+9.2 and 4.9+5.5+7.8+9.5 mm; duration of exposure specified.
  • Evidence of effectiveness:
  • Website

Energy Enhancement System (EES)

  • Device type: Other/Scalar
  • Registered medical device (Y/N), class if relevant: N
  • Energy system measurement (diagnostic) (M) and/or treatment (T): M + T
  • Frequency receiver (Y/N: if yes, range): Y
  • Electrically-powered frequency emission (Y/N, if yes, type e.g. PEMF): Y, photon
  • Markov parameters* (for emission devices only): Photons, 200-800 nm wavelength.
  • Evidence of effectiveness 
  • Website

Harmonic Egg Healing

  • Device type: Vibtroacoustic/Sound/Music
  • Registered medical device (Y/N), class if relevant: N
  • Energy system measurement (diagnostic) (M) and/or treatment (T): T
  • Frequency receiver (Y/N: if yes, range): N
  • Electrically-powered frequency emission (Y/N, if yes, type e.g. PEMF): Resonates up to 1,200 Hz
  • Markov parameters* (for emission devices only): Frequency range and exposure duration given (most other parameters not relevant to acoustic devices).
  • Testimonials
  • Website

Healy Professional Edition

  • Device type: Pulsed Electromagnetic Field (PEMF) Device/Bioresonance type
  • Registered medical device (Y/N), class if relevant: N
  • Energy system measurement (diagnostic) (M) and/or treatment (T):M + T
  • Frequency receiver (Y/N: if yes, range): N
  • Electrically-powered frequency emission (Y/N, if yes, type e.g. PEMF): Yes, pulsed, multiple set programs.
  • Markov parameters* (for emission devices only): The stimulation output can be varied between -10 V and +10 V, 0 to 1 MHz, 0 – 4 mA.
  • Evidence of effectiveness e.g. trials (published, unpublished), testimonials – details):
  • Website

Holimed RemiWave Pro

  • Device type: Pulsed Electromagnetic Field (PEMF) Device/Bioresonance type
  • Registered medical device (Y/N), class if relevant: N
  • Energy system measurement (diagnostic) (M) and/or treatment (T): M + T
  • Frequency receiver (Y/N: if yes, range): Y
  • Electrically-powered frequency emission (Y/N, if yes, type e.g. PEMF): Yes, ?
  • Markov parameters* (for emission devices only): 0–1,000,000 Hertz (1 MHz).
  • Evidence of effectiveness e.g. trials 
  • Website

IteraCare Classic wand by Prife

  • Device type: Thermal/Non-thermal Terahertz wave
  • Registered medical device (Y/N), class if relevant: N
  • Energy system measurement (diagnostic) (M) and/or treatment (T): T
  • Frequency receiver (Y/N: if yes, range): N
  • Electrically-powered frequency emission (Y/N, if yes, type e.g. PEMF): Y, continuous
  • Markov parameters* (for emission devices only): None found/offered.
  • Testimonials 
  • Website (and https://terahertz-device.com/

Iyashi Zero Point Energy Wand

  • Device type: Other/(Scalar) (Subtle energy)
  • Registered medical device (Y/N), class if relevant: N
  • Energy system measurement (diagnostic) (M) and/or treatment (T): T
  • Frequency receiver (Y/N: if yes, range): N
  • Electrically-powered frequency emission (Y/N, if yes, type e.g. PEMF): N
  • Markov parameters* (for emission devices only): “Providing over 18000+ energetic frequencies” (frequency range unspecified)
  • Video testimonial 
  • Website 

Jellen Portable High Frequency violet ray machine

  • Device type: Plasma
  • Registered medical device (Y/N), class if relevant: N
  • Energy system measurement (diagnostic) (M) and/or treatment (T): T
  • Frequency receiver (Y/N: if yes, range): N
  • Electrically-powered frequency emission (Y/N, if yes, type e.g. PEMF): Y
  • Markov parameters* (for emission devices only): Up to 200,000 Hz.
  • Evidence of effectiveness e.g. trials (published, unpublished), testimonials – details):
  • Website

MORA Nova

  • Device type: Pulsed Electromagnetic Field (PEMF) Device/Bioresonance type
  • Registered medical device (Y/N), class if relevant: N
  • Energy system measurement (diagnostic) (M) and/or treatment (T): M + T
  • Frequency receiver (Y/N: if yes, range): Y, 0.1 Hz – 1 MHz
  • Electrically-powered frequency emission (Y/N, if yes, type e.g. PEMF): Y, ?
  • Markov parameters* (for emission devices only): 0.1 Hz – 1 MHz (Aid 0.1 – 1.000.000)
  • Evidence of effectiveness e.g. trials (published, unpublished), testimonials – details):
  • Website (and https://www.moramedtech.co.uk/the-mora-nova-equipment/)  

Oberon Biofeedback Gold

  • Device type: Plasma-based Rife Device
  • Registered medical device (Y/N), class if relevant: N
  • Energy system measurement (diagnostic) (M) and/or treatment (T): M + T
  • Frequency receiver (Y/N: if yes, range): Y, 5 – 30 MHz
  • Electrically-powered frequency emission (Y/N, if yes, type e.g. PEMF): Y
  • Markov parameters* (for emission devices only): Low-frequency 240 Hz; High-frequency 1.5-4.5 GHz
  • Evidence of effectiveness e.g. trials (published, unpublished), testimonials – details):
  • Website  

PERL M+ and ProGen3 by Resonant Light Technology

  • Device type: Plasma-based Rife Device with ~2000 frequency sets
  • Registered medical device (Y/N), class if relevant: N
  • Energy system measurement (diagnostic) (M) and/or treatment (T): M + T
  • Frequency receiver (Y/N: if yes, range):
  • Electrically-powered frequency emission (Y/N, if yes, type e.g. PEMF): Y, continuous or pulsed
  • Markov parameters* (for emission devices only): Frequency generator with multiple programs that can generate sine, square or triangular waveforms, from 1 Hz to 4,000,000 Hz with accessories from 1Hz to 300,000Hz with PERL M+. PERL M+ emits up to 300,000 Hz with 0.001 Hz accuracy, 27.120 Mhz with 1 – 1,000,000 Hz effective modulation; 11.05 m wavelength; amplitude 100 W peak to peak, modulated at targeted frequency; at a distance of 3m, energy output was 95.8dBuV. This translates to 1.008e-5 W/m2, 1.008e-6 mW/cm2, 2.065e-10 Tesla, 2.065e-6 Gauss at 3m.
  • Evidence of effectiveness
  • Website  

Qest 4

  • Device type: Electromagnetic device
  • Registered medical device (Y/N), class if relevant: N
  • Energy system measurement (diagnostic) (M) and/or treatment (T): M + T
  • Frequency receiver (Y/N: if yes, range):
  • Electrically-powered frequency emission (Y/N, if yes, type e.g. PEMF): Y
  • Markov parameters* (for emission devices only): None found/offered.
  • Evidence of effectiveness e.g. trials (published, unpublished), testimonials – details):
  • Website

Rayonex Biomedical (Rayocomp PS10 and Rayocomp PS 1000 Polar 4.0)

  • Device type: Pulsed Electromagnetic Field (PEMF) Devices
  • Registered medical device (Y/N), class if relevant: Y IIa
  • Energy system measurement (diagnostic) (M) and/or treatment (T): M + T
  • Frequency receiver (Y/N: if yes, range): Up to 3 GHz
  • Electrically-powered frequency emission (Y/N, if yes, type e.g. PEMF): Y
  • Markov parameters* (for emission devices only): Continuous sinusiodal wave form; frequency up to 3 GHz; wavelength can be calculated based on speed of light and frequency (specific number not available); depth of penetration, no specific parameter available, but clinical prospective, double-blind randomized and placebo-controlled study showed that internal organs can be reached with bioresonance according to Paul Schmidt; localizaton, detectors made from a special cotton fabric in which very fine stainless-steel wires are woven; different sizes of detectors to allow placement on patient or patient can lie on it (in form of a fitted sheet); duration fo exposure typically 60 minutes.
  • Clinical study and studies
  • Website

Sensate

  • Device type: VibroAcoustic Wave Therapy
  • Registered medical device (Y/N), class if relevant: N
  • Energy system measurement (diagnostic) (M) and/or treatment (T): T
  • Frequency receiver (Y/N: if yes, range): N
  • Electrically-powered frequency emission (Y/N, if yes, type e.g. PEMF): Y, acoustic/vibratory
  • Markov parameters* (for emission devices only): 20 – 140 Hz acoustic (other parameters not relevant).
  • Research study and testimonials
  • Website

Spooky2 Rife

  • Device type: Plasma-based Rife Device, Scalar
  • Registered medical device (Y/N), class if relevant: N
  • Energy system measurement (diagnostic) (M) and/or treatment (T): M + T, T
  • Frequency receiver (Y/N: if yes, range):
  • Electrically-powered frequency emission (Y/N, if yes, type e.g. PEMF): Yes, PEMF
  • Markov parameters* (for emission devices only): Up to 3.5 MHz.
  • Testimonials
  • Website

Vitatec Vitalfield Technology – Mito

  • Device type: Pulsed Electromagnetic Field (PEMF) Devices
  • Registered medical device (Y/N), class if relevant: N
  • Energy system measurement (diagnostic) (M) and/or treatment (T): M + T
  • Frequency receiver (Y/N: if yes, range): Y, <1Hz to >10 GHz (into visible light spectrum)
  • Electrically-powered frequency emission (Y/N, if yes, type e.g. PEMF): Y, variable, 1 Hz to 120 GHz
  • Markov parameters* (for emission devices only): Frequency: <1 Hz to 120 GHz, pulsed, variable; waveform variable (including triangle); wavelength 415 nm – 15 µm; Intensity/induction 1.5 mT; gradient (dB/dt) 1.5 T/s; electric and electromagnetic components; depth of penetration from few mm to the whole body; exposure 15-60 min.
  • Testimonials
  • Website (also https://www.medtec.at/en/)

Vitatec Vitalfield Technology – Global Diagnostics

  • Device type: Pulsed Electromagnetic Field (PEMF) Devices
  • Registered medical device (Y/N), class if relevant: N
  • Energy system measurement (diagnostic) (M) and/or treatment (T): M + T
  • Frequency receiver (Y/N: if yes, range): Y
  • Electrically-powered frequency emission (Y/N, if yes, type e.g. PEMF): 1 Hz to 120 GHz
  • Markov parameters* (for emission devices only): Electric (capacitive coupling) field; very variable emission pattern; frequency 0.1 Hz to 1 GHz; energetic value < 400 mV; depth of penetration whole body; exposure 15-50 min.
  • Testimonials
  • Website (also https://www.medtec.at/en/)

*These are parameters identified by Markov “for characterization of device and study/clinical trial,” discussed above and derived from his 2015 paper, XXIst century magnetotherapy.

Important note: We have entered the data above that we have been able to find in the public domain or have received following requests to the best of our ability. This information is for guidance only and may be in error or there may be omissions. For that reason, we urge anyone interested in any of these devices to contact the manufacturer or distributor directly for any further information. In the event of any errors or omissions, we also would be very happy to hear from any of the manufacturers listed with the view to making any corrections or additions.

From this small sample of devices mentioned above, there is evidently great variation between the kinds of devices and technical data available about them. In the acoustic and vibroacoustic area, the data are obviously much more straightforward, so it is in the area of electrically-powered electromagnetic, plasma-based and scalar devices that emit electromagnetic frequencies where data become much more relevant.

There were clearly a few companies that have a much greater degree of transparency than others, the standouts being Vitatec, Rayonex, Bio-Well and Resonant Light Technologies (PERL+ and ProGen3). By contrast, there were other companies where standards of data transparency appeared to fall well short of expectations.

We have some concerns over devices that are heavily marketed on the basis of testimonials, with little technical detail. The iTeraCare wand was one such example, where the device is categorized by the manufacturer (presumably owing to CE mark certifications) as a “hot air blower,” yet details about the claimed terahertz electromagnetic radiation output don’t appear to be available in the public domain.

Claims by multi-level network distributors who are selling the devices, including those who are seriously ill with COVID-19 “vaccine” injury, vary, some suggesting the waves penetrate 20-30 cm into the body, others 20-30 mm. Contact details or a website for the manufacturer were difficult to find, not to be confused with the network marketing company Prife International which has exclusive distributorship.

Other devices, such as the Energy Enhancement System that rely on scalar energy typically issued through batteries of computer screens are being pushed hard by influential individuals including many integrative doctors in the U.S. While some of the case reports are inspiring, we were surprised to find little in the way of technical detail about the underlying technology.

Clean or dirty signals?

There are many things about various devices that can’t be revealed by reading the manufacturers’ specifications and marketing materials, even if they appear quite comprehensive.

Take, for instance, the nature of transmitting signals received by the body from an electrode of some form, reading or interpreting them in a read-out of some sort on the device, and returning different signals via an algorithm in ways that modulate the body’s response with the aim of improving energetic coherence and function. This is, after all, the principal aim of many devices in the wellness space.

You’ll recall that the electromagnetic (including photonic) signals emitted by the body are very (even “ultra”) weak. That doesn’t make them unimportant; it probably makes them more important, but also more able to be interfered with by human-created electromagnetic signals used (also) for communication purposes.

Like an orchestra, the body’s signals work across a full harmonic range from very low to very high frequencies.

Just like you can only hear a fraction of the full range of acoustic sounds, harmonies and resultant harmonics produced during Karajan and the Berlin Philharmonic’s rendition of Mahler’s 9th symphony when you listen to it through a ghetto blaster, much of the signal quality can be lost if the receiver (electrodes or antennae) are lacking in quality and there is excessive loss and noise when the signals travel between the body and the device itself.

By contrast, a highly sensitive receiver, with little loss in quality of signal transmission, that is capable of a wide frequency range, allows you to “listen” to the information emanating from the body’s electromagnetic field in its full glory. With all the harmonics in place, even the likes of Mahler might have been appeased had he been alive to “hear” the human body.

In many cases, long cables (3 meters or more in length) are used by manufacturers to allow the cables to reach a patient or client lying prone on a couch.

But what is the quality of these cables? And what is the quality or sensitivity of the antenna or electrodes?

We know these are excellent in some cases, while in others, this appears a lesser priority. So how does a practitioner or potential user know whether a manufacturer has used the best sensors available and the highest quality, double or triple-insulated cables specifically designed for very low voltages if this information isn’t made publicly available?

What also happens to signals emitted from digital devices? Do they emit step-like, digital signals that are alien to natural systems prior to the invention of digital communication systems? Have they been converted via a digital to analog converter? Has the conversion happened without loss of key information?

Not sorting out these ancillary elements is akin to trying to drink an exclusive wine from a used Starbucks cup with the dregs left in it.

And if you use the best technology to get the highest quality biological information and signaling you can get — presumably it makes sense to communicate this to potential buyers so they know they’re going to be drinking from a beautiful crystal glass deserving of their biofield?

Do frequency medicine devices work?

This is probably the toughest question to unravel for a potential user. There are many different ways that people make a judgment over whether a device works, in the sense it enhances the body’s natural homeostatic or healing mechanisms.

Here are 10 possibilities:

  1. Personal experience.
  2. Word of mouth.
  3. Public-facing testimonials.
  4. Key opinion leader or influencer’s communication or endorsement.
  5. Advertising, along with claims, which may or may not be substantiated.
  6. Third-party reviews published in the popular, special interest or scientific media.
  7. Mechanistic studies by the manufacturer or third party that demonstrates a plausible mechanism for a beneficial biological effect.
  8. Manufacturer’s own outcome-based/effectiveness trials, “unpublished” (typically produced as a non-peer-reviewed report) or published in the peer-reviewed literature.
  9. Outcome-based/effectiveness trials or studies by a third party (independent institution or company), “unpublished” or published in the peer review.
  10.  Aggregated clinical evidence; i.e. evidence of consistent positive health outcomes associated with the use of the device by multiple practitioners and many more patients.

One of the results of our own evaluation of this sector is that there’s a lot of smart marketing out there, but, for some devices, the substance (read: data) we’d hoped to see just wasn’t available. This is much less the case for those devices that have been adopted by the medical mainstream (figure 4) and others that have received Class IIa medical device registration for specific indications, such as the bioresonance devices by Rayonex and BICOM.

This is because device registration requires proof of both safety and clinical effectiveness via clinical trials. This, however, does not mean that devices for which there are more data are necessarily better, more effective or even safer than those devices for which fewer data are available.

It just means as Markov alludes in his 2015 paper, that it is not possible to make a meaningful assessment of the technology where crucial data, say on factors such as frequency and amplitude ranges, field gradient and duration of exposures have been designated by manufacturers.

The issue of data transparency and the need, or otherwise, to seek registration, is a complex one, in part because of the diversity of signals and fields with which different devices work, and because some devices work so much more holistically than others, on so many aspects of the physical body and biofield.

This makes it much harder to squeeze them into the square peg format required for registration, which requires a clinical trial focused on given indications or health conditions.

But it’s not just that.

Some manufacturers take a principled position of not wanting to disclose technical information to a regulatory authority given the well-known revolving door between drug/device regulators and Big Pharma.

Others consider themselves as only making or marketing wellness devices designed for healthy people who don’t have serious diseases, so medical device registration isn’t appropriate.

Others, still, would much rather keep their heads below the parapet, as they know only too well that the operating principles of their devices, involving the human biofield, are so alien to any regulator steeped in the biochemical, Newtonian-Cartesian model of medicine, that pursuing regulatory approval would almost certainly be fruitless. That is, until such time that regulators are forced to catch up with the emerging science of biofield devices.

Interacting human biofields — invisible to most, detected and measured by a rapidly increasing number of frequency-based devices.

What to do … nothing or something?

Our view is that the sector, as a whole, could do somewhat better at metering out relevant information to the public — to maintain the all-important bioethical principle of informed consent, as well as to support the notion, that’s been at the heart of Alliance of Natural Health’s work since our beginnings more than 20 years ago, of informed choice.

For some companies, lesser reliance on testimonials and advertising claims that cannot be independently substantiated would be a good start. So would collaborations with highly experienced and influential clinicians, who can then communicate their own findings from case reports or observational studies to peers.

Collaborations with independent scientists in order to aggregate relevant clinical data so we can better understand effects within a science-based context would be a huge asset.

The use of spurious claims that are not possible for a practitioner or interested member of the public to corroborate, is no help to anyone in the long-term, not even to those whose companies might benefit from the short-term win such claims can bring.

They simply give regulators — even non-government, self-appointed ones like the U.K.’s Advertising Standards Authority, a reason to sharpen their knives, as seen by this advisory, including two negative rulings on marketing claims for bioresonance therapy.

Much of this transition, no doubt, will come in time as the sector matures. The limitations of what is out there, in the public domain, are to a large extent just a symptom of the youthfulness of this rapidly emerging sector.

All of it is made more confusing because the principles on which biofield devices operate are alien to so many, especially outside the German-speaking countries that have been the main hotbed of research of development to date.

Asking if frequency medicine works is not a dissimilar question to asking if natural — or even pharmaceutical — medicine works. Of course it does! But this doesn’t mean it works in all people all of the time! It depends on multiple factors, including which devices, which element of human health you’re considering, under what conditions, on which person, at what time.

Now, some good news!

In general terms, it’s not hard to find plenty of evidence of positive, beneficial effects, with an absence of any safety problems. But the evidence that some devices have been proven to work for some conditions and some people doesn’t mean this claim can be brandished across all those devices, including those that haven’t engaged in a more scientific process of evaluation.

Imagine how the public would react if drug companies relied on the research studies on natural monacolins from red yeast rice to help sell their statin drugs! Ouch — of course, some do!

Okay — now you want the detail. As the area is so huge I want to point you to three useful reviews that link to many successful research studies and clarify the potential of frequency-based devices.

These are as follows:

Despite the sometimes patchy picture of information currently available in the public domain, when one looks in totality at all of the available information and data and considers the forces that this sector is up against given the monopolistic agenda of Big Pharma, I don’t for a moment doubt Einstein’s prediction that “Future medicine will be the medicine of frequencies.”

One thing is for sure, the sector is growing. This trend tracks alongside the ever more widely recognized problem: the prevailing biochemical, molecular, genetic and Newtonian-Cartesian concepts that underpin mainstream, allopathic medicine are just too limited to deliver consistent, high-quality healthcare.

More than that, an ever-growing number of people are opening up to the idea that electromagnetic energy, frequencies and resonances are — as we discussed in Part 1 — essential to life.

More interest results in more experiences, which means more devices sold, leading, in turn, to more research. As such, the evidence base, particularly from all-important clinical practice, is expanding each year.

There’s another key reason for the mounting interest in frequency-based devices. As our bodies get ever more distorted by human-created electromagnetic fields, the importance of bringing them into coherence through the use of specific electromagnetic fields will become ever more important.

Conclusions

As an independent scientist, it has been something of a bumpy journey investigating the publicly available data and information being used to market frequency-based devices.

Having said this, my enthusiasm over the potential for the frequency medicine sector to not only become central in the area of diagnostics but also in treatment (both preventative and curative), has not been dampened in the slightest.

I don’t doubt it will happen, because like many I fully acknowledge that frequency and electromagnetism are the next major frontier in medicine — because it is so fundamental to all biological processes.

What I am less sure about, however, is the time it will take to become universally accepted. This, in my view, will depend a lot on the investment technological leaders make in proving benefit and safety, the commitment shown to transparency, and the degree of care and responsibility taken in communicating information and knowledge to the health professions and the wider world.

This also means navigating the regulatory swamp that has been created for more than 70 years by the drug regulators who have established a system that works well for their paymasters, and has been deliberately orchestrated to shut out, or shut down, the competition that might negatively impact the bottom lines of Big Pharma or Big Devices (have I just invented a new term?).

The nutritional and supplements industry is a case in point, having been at loggerheads with regulators for decades. But the science used to defend nutrition is still largely based on the biochemical model of physiology — and still ignores the electromagnetic components, resonances and quantum signaling that occurs when food and nutrients interact with the physical and energetic body.

Like with any new industrial sector, responsible self-regulation is the best way of avoiding the kind of events, however trivial they seem, that regulators will happily use to annihilate the new competition.

The over-zealous and entirely unnecessary actions the U.S. FDA and EU regulators have taken to knee-cap the rapidly expanding cannabidiol, or CBD, sector are cases in point.

Originally published by Alliance for Natural Health International